SEMCO
Testpanel LE 84 >>Maxi<<
Test Facilities and Outlets
1.) 3 terminal L1 - L2 - L3 for 3
phase current 440V, 60 Hz or 400V, 50Hz equal to load up to 7,5kW.
The test circuit is over current/short-circuit
protected by a 3 pole, 16A miniature circuit breaker.
2.) 3 terminals and 2 sockets with earth, universal of European
standard ( 19mm ) for variable voltage 0 – 250 – 500V
AC and protected by a 2 pole 3 A miniature
circuit breaker.
3.) 2 terminals for variable
voltage 0 – 30V AC protected by a 10 amps circuit breaker.
4.) 2 terminals for variable voltage 0 – 28VDC protected by a 10
amps. circuit breaker.
Note: Can be used for recharging of
batteries.
5.) 2 terminals for 2 resistance conductivity or leakage testing.
6.) 1 universal fuse test fixture.
7.) 1 lamp socket E27/B22.
8.) 2 terminals for high resistance/-conductivity or leakage
testing.
9.) 2 sockets for test of 20W fluorescent tubes.
10.) 1 socket for test of PL-tubes.
11.)
Socket for 20W starter.
12.)
2 terminals for test of 20W ballast.
13.)
2 terminals for stabilized variable ripple free power supply 0-24VDC 1A. All
outlets are short circuit save.
Optional Test Facilities
1.)
Sockets for testing of 40W fluorescent tubes.
2.)
Variable DC voltage 0 – 300V.
3.)
Emergency stop and earth leakage protection.
Instruments
1-Digital ammeter, 3½
digit, scale 0 - 19,99 A.
1-Digital voltmeter, 3 digit, scale 0 – 600 V.
Red
LED, digits 12mm.
Accuracy:
0,5% of reading +/- 1 digit.
1-Analog voltmeter scale 0 – 30 V DC.
1 Analog ammeter scale 0-1 A DC.
The applied voltage and current to test outlets are selected by the volt and
ammeter selector switch.
Colour
The
testpanel is standard painted in a light green ( RAL 6019 ) color or light grey
colour ( RAL 7032 ).
Different colour only against extra price.
Dimensions
Height:
600mm
Depth total: 300 mm
Length:
900 mm
Fixing
holes: 12 Æ, 638 x
780mm
Max.
height: 440mm
Glands:
PG21
Weight:
52 kg