Test Facilities and Outlets

1.) 3 terminal L1 - L2 - L3 for 3 phase current 440V, 60 Hz or 400V, 50Hz equal to load up to 7,5kW. 
        The test circuit is over current/short-circuit protected by a 3 pole, 10A miniature circuit breaker.

2.) 2 terminals and 1 socket with earth, universal of European standard ( 19mm ) for variable voltage 0 – 250V
       and protected by a 2 pole 3 A miniature circuit breaker.

3.) 2 terminals for variable voltage 0 – 30V AC protected by a 10 amps circuit breaker.

4.) 2 terminals for variable voltage 0 – 28V DC protected by a 10 amps. circuit breaker. 
       Note: Can be used for recharging of batteries.

5.) 2 terminals for low resistance conductivity or leakage testing.

6.) 2 terminals for high resistance/-conductivity or leakage testing.

7.) 2 sockets for test of 20W fluorescent tubes.

8.) Socket for test of PL-tubes.

9.) Terminals for test of 20W ballast.  

Optional Test Facilities

1.) Sockets for test of Ba9s bulb 6,3 to 30V.

2.) Socket for test of PL-fluorescent tube.

3.) 3-phase + neutral version with earth leakage circuit breaker for industrial use.  

Instruments

1-Digital ammeter, 3 digit, scale 0 - 9,99 A.
1-Digital voltmeter, 3 digit, scale 0 – 600 V.
Red LED, digits 13mm.
Accuracy: 1% of reading +/- 1 digit..
The voltage and current applied to the test outlets are selected by the volt and ammeter selector switch.

Colour

The testpanel is painted in a yellow ( RAL 1015 ) or light grey colour ( RAL 7032 ). 
Different colour only against extra price.

Dimensions